Dustbane Orbit All Systems Floor Finish

Experience the brilliance of Dustbane's Ecologo Orbit floor finish. Specifically designed for high traffic areas, this extraordinary product delivers a stunning "wet look" gloss and unbeatable durability. With a high solid content of 20%, it effortlessly creates the desired film thickness in fewer coats. Plus, its zinc-free formula showcases our commitment to sustainability.

But that's not all - a small amount goes a long way, covering up to 2500 sq ft with just a 4lt bottle. Orbit not only provides an impeccable high gloss finish but also offers exceptional resistance to scratches.

How To Use

Preparation:Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish.

Application:Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more.

Maintenance:Dust and/or wet mop daily. Spray buff as needed. For best results, after damp mopping with a neutral floor detergent, apply Orbit diluted at 1:4, let dry for 30 minutes then burnish the floor. Burnishing daily is highly recommended but not imperative.

Coverage:Coverage per 4 L is 149 m² (1600 ft²) to 232 m² (2500 ft²) depending upon porosity of the floor.

Where To Use

Suitable for all resilient and non-resilient floors except for unsealed wood and cork.

• Floor
• High Traffic Area

• Unscented
• Low Odor
• Phosphate-free
• Solvent-free
• Durable
• Zinc-free
• Scratch Resistant
• Long Lasting
• Slip Resistant
• Detergent Resistant
• Scuff Resistant
• Black Mark Resistant
• Non-yellowing
• Water Based